A Power Generation Study Using a Hybrid Model of Solar and Wind Energy

Authors

  • Nowsheena Hamid M.Tech Student, Power System, Department of Electrical Engineering, RIMT University, Punjab, India Author
  • Krishna Tomar Assistant Professor, Department of Electrical Engineering, RIMT University, Punjab, India Author
  • Satish Saini Professor, Department of Electrical Engineering, RIMT University, Punjab, India Author

Keywords:

Carbon footprint, Outage, Hybrid Renewable Energy, Battery Bank, Standalone, PV

Abstract

With a large number of cities and villages, India is the second  highest populated country in the world. In India, villages still  house a sizable percentage of the people. To better their  socioeconomic situation, small cottage businesses that may  employ local residents should be developed. The industries  included in the programme are small cottage businesses that  operate during the day and close at night. These businesses  need a steady supply of electricity. However, due to its  geographic constraints, the area has seen a significant loss of  supply and has frequently finding electricity inadequate to run  the equipment. As a result, industry expansion would be  impeded, and local residents' development would be affected.  Renewable energy, on the other hand, may be produced and  utilized on-site, enhancing supply reliability. They have a  cheap operating cost because they are renewable in nature.  However, because renewable energy output is entirely dependent on weather conditions, a battery bank must be used  as a backup.. This backdrop describes a way for combining  solar PV with wind energy. The system considers integrating  solar PV and wind energy to satisfy demand because they  compliment each other in nature. The software may be used  independently. The system runs several permutations of the  model to find the most optimum model capable of providing  consistent, acceptable quality, and cost-competitive electricity.  The strategy also researches and analyses the degree of  renewable penetration to minimize carbon footprint,  investigates combinations to reduce capital investment, and  focuses on decreasing the levelized cost of energy. 

Downloads

Download data is not yet available.

References

IEA, International energy annual 2004. Energy Information Administration; 2006

Raj A.K., Srivastava A.P., Dwivedi M. 2013 “Power plant engineering”, ISBN (13) : 978-81- 224-2333-4, New Age International (P) Ltd., publisher, New Delhi, India

Akella AK, Saini RP, SharmaMP. Social, economical and environmental impacts of renewable energy systems. Renewable Energy 2009;34:390–6

Ma T, Yang H., Lu L., &Peng J., (2015). Pumped storage-based standalone photovoltaic power generation system: Modeling and techno-economic optimization. Applied Energy, 137, 649-659.

O'Shaughnessya Eric, Cutlera Dylan , Ardania Kristen, Margolisa Robert, (2018) Solar plus: Optimization of distributed solar PV through battery storage and dispatchable load in residential buildings . Applied Energy, 213, 11-21

[last accessed 10.03 2021

Chen H, Cong TN, Yang W, Tan C, Li Y, Ding Y. Progress in electrical energy storage system: a critical review. Prog Nat Sci 2009;19:291e312.

Kocak K. Practical ways of evaluating wind speed persistence. Energy 2008;33: 65–70

Sahin AZ, Aksakal A. Wind power energy potential at the Northeastern region of Saudi Arabia. Renew Energ 1998;14:435–40

Liu LQ,Wang ZX, Zhang HG, Xue YC. Solar energy development in China – a review. Renewable and Sustainable Energy Reviews 2010; 14:301 – 11.

Annual report 2004 of Ministry of Non Conventional Energy Sources (MNES), Govt. of India, www.mnes.nic.in

Chaurey A., &Kandpal T. C. (2010). A techno economic comparison of rural electrification based on solar home systems and PV microgrids. Energy Policy, 38(6), 3118-3129 Kristinsson, K., & Rao, R. (2008). Interactive Learning or Technology Transfer as a Way to Catch-Up. Analysing the Wind Energy Industry in Denmark and India. Industry & Innovation, 15(3), 297–

Kristinsson, K., & Rao, R. (2008). Interactive Learning or Technology Transfer as a Way to Catch-Up. Analysing the Wind Energy Industry in Denmark and India. Industry & Innovation, 15(3), 297–320.

Ashok, S. (2007). Optimised model for community based hybrid energy system. Renewable Energy, 32(7), 1155–1164

Analysis of photovoltaic system energy performance evaluation method- National Renewable Energy Laboratary USA

International Electro technical Commission, Photovoltaic system performance monitoring – guidelines for measurement data exchange and analysis International Standard IEC61724 Ed

Arribas L., Cano L., Cruz I., Mata M., &Llobet E. (2010). PV–wind hybrid system performance: A new approach and a case study. Renewable energy 35(1), 128-137.

IS/IEC 61724:1988, Indian standard Photovoltaic system performance monitoring-guidelines for measurement, data exchange and analysis

Bhattacharjee S., & Acharya S. (2015). PV–wind hybrid power option for a low wind topography. Energy Conversion and Management, 89, 942-954

Ma T, Yang H, Lu L. A feasibility study of a stand alone hybrid solar–wind– battery system for a remote island. Appl Energy 2014; 121:149–58.

Ma T., Yang H., Lu L., &Peng J. (2015). Pumped storage-based standalone photovoltaic power generation system: Modeling and techno-economic optimization. Applied Energy, 137, 649-659.

Downloads

Published

2021-11-30

How to Cite

A Power Generation Study Using a Hybrid Model of Solar and Wind Energy . (2021). International Journal of Innovative Research in Engineering & Management, 8(6), 113–119. Retrieved from https://acspublisher.com/journals/index.php/ijirem/article/view/11548