An Overview on Green Technologies
Keywords:
Clean Technologies, Green Technologies, Sustainability, Sustainable DevelopmentAbstract
Climate change, energy depletion, global warming, as well as other worries about the environment have prompted the development of green technology in recent years. According to researchers, as the degree of sustainable development rises, so will the economy and society. It will also have a significant effect on long-term sustainability. Human creativity and invention are marked by technological advances in contemporary civilization. However, these technologies have wreaked havoc on the environment on a local, regional, and global scale. Green technologies have a bright future when it comes to fulfilling the demands of long-term economic viability. However, reciprocal reinforcement of environmental and social sustainability aspects is required. Before a technology is implemented, its environmental and economic effect, as well as its efficiency, should be assessed. When economic and long-term development is strongly prioritized, it should be a win-win scenario. This article addresses the difficulties of developing and adopting green technology, as well as the tendencies that contribute to sustainability. Regulatory regulations and financial problems are also discussed in the study.
Downloads
References
S. Parashar and V. K. Chawla, “A systematic review on sustainable green fibre reinforced composite and their analytical models,” 2020, doi: 10.1016/j.matpr.2021.03.739.
G. Jungmeier, “The Biorefinery Fact Sheet,” Int. J. Life Cycle Assess., 2017.
D. H. Jeong, M. H. Suh, W. Shim, and Y. Il Kwon, “Study on measurement of the degree of convergence among green technologies through the analysis of the green technology expert network,” 2012.
S. Aithal, S. Aithal, and P. S. Aithal, “Opportunities & Challenges for Green Technology in 21st Century Opportunities & Challenges for Green Technologies in 21 st Century,” MPRA Pap. No., 2016.
Ahmaed, and M. Mukapit, “Sustainability of Green Technology in Malaysia Industry,” iDECON 2012 – Int. Conf. Des. Concurr. Eng., 2012.
[6] S. Aithal and S. Aithal, “Opportunities & Challenges for Green Technology in 21st Century,” Munich Pers. RePEc Arch., 2016.
P. K. Gupta and S. Gupta, “Generation of green electricity with pedal generator,” 2018, doi: 10.1109/SYSMART.2018.8746927.
A. Sinha, Jayanand, and V. Kumar, “Role of green silver nanoparticles in suppressing various human pathogenesis,” Rev. Adv. Mater. Sci., 2017.
S. Tiwari, M. K. Gautam, and A. Sharma, “Effect of Curing Methods on the Properties of Green Concrete,” 2021, doi: 10.1007/978-981-16-0942-8_22.
A. Sbardella, F. Perruchas, L. Napolitano, N. Barbieri, and D. Consoli, “Green technology fitness,” Entropy, 2018, doi: 10.3390/e20100776.
P. Pouranick and A. D. Gupta, “Green technology – emerging green technologies in energy sector,” Int. J. ChemTech Res., 2015.
I. Ishak, R. Jamaludin, and N. H. Abu, “Green technology concept and implementataion: A brief review of current development,” Advanced Science Letters. 2017, doi: 10.1166/asl.2017.9928.
A. Sinha, J. Manjhi, V. Kumar, and D. V. Rai, “Evaluation of antibacterial properties of silver nanoparticles prepared via green route using elaeocarpus ganitrus (rudraksha) beads extract,” J. Bionanoscience, 2018, doi: 10.1166/jbns.2018.1552.
A. Sinha and J. Manjhi, “Silver nanoparticles: Green route of synthesis and antimicrobial profile,” Int. J. Nanoparticles, 2015, doi: 10.1504/IJNP.2015.070342.
T. Singh, G. Awasthi, and Y. Tiwari, “Recruiting endophytic bacteria of wetland plants to phytoremediate organic pollutants,” International Journal of Environmental Science and Technology. 2021, doi: 10.1007/s13762-021-03476-y.
R. Shrivastava, R. S. Rajaura, S. Srivastava, and K. K. Awasthi, “Second International Conference on ‘Recent Trends in Environment and Sustainable Development’ (RTESD 2019),” Environmental Science and Pollution Research. 2021, doi: 10.1007/s11356-020-11750-8.
A. Goswami, J. Singh, D. Kumar, S. Gupta, and Sushila, “An efficient analytical technique for fractional partial differential equations occurring in ion acoustic waves in plasma,” J. Ocean Eng. Sci., 2019, doi: 10.1016/j.joes.2019.01.003.
S. Kuc and M. Kmieć, “2013 IBA hamburg – green space and green technologies,” 2015, doi: 10.5593/sgem2015B62.
L. Luo and S. Liang, “Study on the efficiency and regional disparity of green technology innovation in China’s industrial companies,” Chinese J. Popul. Resour. Environ., 2016, doi: 10.1080/10042857.2016.1258799.
W. S. Chu, D. M. Chun, and S. H. Ahn, “Research advancement of green technologies,” Int. J. Precis. Eng. Manuf., 2014, doi: 10.1007/s12541-014-0424-8.
D. Singh, “Robust controlling of thermal mixing procedure by means of sliding type controlling,” Int. J. Eng. Adv. Technol., 2019, doi: 10.35940/ijeat.F1303.0986S319.
M. Iyer et al., “Environmental survival of SARS CoV-2 – A solid waste perspective,” Environ. Res., 2021, doi: 10.1016/j.envres.2021.111015.
Zam-zam fauziah, “pengembangan media pembelajaran berbasis booklet pada mata pelajaran biologi untuk siswa kelas XI MIA madrasah aliyah alauddin pao-pao dan Man 1 makasar,” PLoS Negl. Trop. Dis., 2017.
