Some Experimental Investigations in Friction Welding of Dissimilar Alloys
Keywords:
Friction welding, Dissimilar joint, AA6063, weld efficiency, SS202, Micro-HardnessAbstract
Friction welding offers a number of benefits over conventional techniques by using the force of friction to successfully fuse metals. The study's main objective is to identify regions with unrealized potential and investigate current trends in friction welding. These advantages include improved tensile strength, refined grain hardness, and superior metallurgical characteristics compared to the original metal. The specific goal of the research is to provide light on areas that have not yet reached their maximum potential. This study collects and examines friction welding anecdotes with an emphasis on welding settings, testing procedures, and the materials used in the welding process. By examining these important areas in detail, the study delves into the subtleties of friction welding. It is clear that rotational speed is an important and crucial factor. Heat input and stress analysis using sophisticated techniques, however, are still neglected. This assessment suggests recommendations for the manufacturing sector, emphasizing potential benefits for industrial applications in the future. The results highlight the necessity of doing additional research and applying heat input and stress analysis to friction welding procedures in order to improve manufacturing efficiency and results. In this work, an attempt has been made to weld the stainless steel SS202 and aluminium alloy AA6063 using the method of friction welding under the various welding parameters, yielding a sound welded connection with an 83% joint efficiency.
Downloads
References
Ajay, V. Babu, N.K. Ashfaq, M. Kumar, T.M. Krishna, K.V. (2021) A Review on Rotary and Linear Friction Welding of Inconel Alloys, Trans. Indian Inst. Met. 74 (11) (2021) 2583–2598,
Vyas, H.D. Mehta, K.P. Badheka, V, Doshi, B. (2021) Friction welding of dissimilar joints copper-stainless steel pipe consist of 0. 06 wall thickness to pipe diameter ratio, J. Manuf. Process. vol. 68, no. PA (2021) 1176–1190.
M. Sahin, Evaluation of the joint-interface properties of austenitic-stainless steels (AISI 304) joined by friction welding, Mater. Des. 28 (7) (2007) 2244– 2250,
M.N. Avettand-Fènoël, G. Racineux, L. Debeugny, R. Taillard, Microstructural characterization and mechanical performance of an AA2024 aluminium alloy - Pure copper joint obtained by linear friction welding, Mater. Des. 98 (2016) 305–318,
K. Ozel, M. Sahin, A. Akdogan, Mechanical and metallurgical properties of aluminium and copper sheets joined by cold pressure welding, Stroj. Vestnik/ Journal Mech. Eng. 54 (11) (2008) 796–806.
H. Nami, H. Adgi, M. Sharifitabar, H. Shamabadi, Microstructure and mechanical properties of friction stir
welded Al/Mg2Si metal matrix cast composite, Mater. Des. 32 (2) (2011) 976–983,
D. Wang, Q.Z. Wang, B.L. Xiao, Z.Y. Ma, Achieving friction stir welded SiCp/Al– Cu–Mg composite joint of nearly equal strength to base material at high welding speed, Mater. Sci. Eng. A 589 (2014) 271–274.
R Paventhan, PR Lakshminariyan, V Balasubramanian (2012), Optimisation of Friction Welding process parameters for joining carbon steel and Stainless steel 19 (1) 66-71
R. Winiczenko, M. Kaczorowski (2013), Friction welding of ductile iron with stainless steel. Vol. 213, 453-462 [10] S.T Selvamani, K. Palanikumar (2014), Optimising the
friction welding parameters to attain maximum tensile strength in AISI 1035 grade carbon steel rods.
T.N. Prasanthi, C. Sudha, Ravikirana, S. Saroja, N. Naveen Kumar, G.D. Janakiram, (2015), Friction Welding of mild steel and titanium: Optimization of process parameters and evolution of interface microstructure, 88, 58-68
M. Kimura, T. Iijima, M. Kusaka, K. Kaizu, A. Fuji (2016), Joining phenomenon and tensile strength of friction welded joint between Ti-6Al-4V titanium alloy and low carbon steel. Vol. 24, Page No. 203-211
A. Chennakesava Reddy (2017), Evaluation of parametric significance in Friction Welding process of AA1100 and Zr705 Alloy using Finite Element Analysis, 4, 2624-2631
McAndrew, A.R., Colegrove, Flipo & Vairis (2018). A literature review of Ti-6Al-4v linear friction welding. Progress in Materials Science, 92, 225-257
Baghel, A., Sharma, C., Rathee, S., & Srivastava, M. (2021). Activated flux TIG welding of dissimilar SS202 and SS304 alloys: Effect of oxide and chloride fluxes on microstructure and mechanical properties of joints. Materials Today: Proceedings xxx (xxxx) xxx, 8.
Senthil Murugan, S., Noorul Haq, A., Sathiya, P. (2020). Effect of welding parameters on the microstructure and mechanical properties of the friction-welded dissimilar joints of AA6063 alloy and faying surface
tapered AISI304L alloy, Welding in the World, 64, pp. 483–499. DOI: 10.1007/s40194-020-00846-x.
saini, s., chohan, s. j., & bopari, s. k. (2022). Evaluating the microstructural characteristics in friction stir welding of magnesium AZ61a alloy. materials today proceedings, 48, 1762-1768.
Singh, G., Saini, S., & Rana, A. (2022) ‘Experimental Investigation of the Friction Stir Welded Dissimilar Aluminium Alloys’ International Journal of for research in applied science and Engineering Technology (IJRASET). Vol. no.10(4), pp. 982-989.
Saini, S., Cheema, G., and Kang, S, A., (2013) “Some experimental Investigation in Friction Stir Welding of Magnesium AZ61A Alloy” proceedings of 3rd international conference on Production and Industrial Engg., CPIE 2013 Held at NIT, Jalandhar, pp.no.241- 243.
Saini, S., Chohan, S, J., and Singh, K., (2022) “Evaluating the microstructural characteristics in Friction stir welding of Magnesium AZ61 a” in Material today: proceedings, Vol.48 (5), pp.1762-1768.
Gul, U., Saini, S., and Rana, A., (2023) “Evaluating the Microstructural Characteristics of Dissimilar AL Alloys Using FSW” Europeon Chemical Bulletin, 12(Special Issue 6), pp. 2630-2636.
Gul, U., Saini, S., and Rana, A., (2023) “Experimentally Investigation the FSW Of Dissimilar AL Alloys Using the Taguchi L-27 Approach” Europeon Chemical Bulletin, 12(Special Issue 6), pp. 2622-2629.
Warris, M., Saini, S., and Rana, A.,(2022) “Latest Developments in Friction Welding- A Review” International Journal of for research in applied science and
Engineering Technology (IJRASET) 2022-0232321-9653 Volume 11, Issue IV, April 2023, https://doi.org/10.22214/ijraset.2023.50021
