Integration of Renewable Energy Generating Sources with Micro-Grid

Authors

  • Jadapalli Suresh Student, Department of Electrical and Electronics Engineering, PACE Institute of Technology and Sciences, Ongole, Andhra Pradesh, India Author
  • Bolleddu Mohan Kumar Student, Department of Electrical and Electronics Engineering, PACE Institute of Technology and Sciences, Ongole, Andhra Pradesh, India Author
  • Gunji Suresh Student, Department of Electrical and Electronics Engineering, PACE Institute of Technology and Sciences, Ongole, Andhra Pradesh, India Author
  • Gadde Ravi Varma Student, Department of Electrical and Electronics Engineering, PACE Institute of Technology and Sciences, Ongole, Andhra Pradesh, India Author
  • Kunchala Murali Student, Department of Electrical and Electronics Engineering, PACE Institute of Technology and Sciences, Ongole, Andhra Pradesh, India Author
  • C Rajalingam Assistant Professor, Department of Electrical and Electronics Engineering, PACE Institute of Technology and Sciences, Ongole, Andhra Pradesh, India Author
  • R Shankar Associate Professor, Department of Electrical and Electronics Engineering, PACE Institute of Technology and Sciences, Ongole, Andhra Pradesh, India Author

Keywords:

Wind energy, DFIG, Vector Control, Power Quality, Micro-grid, Battery Energy Storage System, Renewable Energy System

Abstract

The management of remote sites' hybrid  wind-and-solar energy-powered micro grids. The battery  bank is connected to a shared DC bus from the double fed  induction generator (DFIG), which is the device used to  convert wind energy. The conversion of solar energy takes  place in photovoltaic (PV) arrays. On the common DC bus  of DFIG, a DC-DC boost converter efficiently consumes  solar energy. The line-side converter with drooping  characteristics' indirect vector control is used to regulate  the voltage and frequency. It slows the overcharging or  discharging of the battery by altering the frequency  reference dependent on the battery's energy level. You can  run this system without using wind energy. Maximum  power point tracking (MPPT) is a component of control  algorithms for wind and solar systems. In addition to  having external power support to charge the battery  without the need for additional power, this system is  designed for completely automated operation, taking into  account all of the actual system conditions. The system's  simulation model is created in the MATLAB environment,  and the simulation results are presented in a variety of  ways. Low battery charge state, imbalanced load,  impervious to wind or sunlight, and non-linear. A 3.7kW  wound rotor asynchronous machine and a 5kW  photovoltaic array simulator are used to execute the system  and produce experimental results that confirm the  theoretical model and design. 

Downloads

Download data is not yet available.

References

H. Zhu, D. Zhang, H. S. Athab, B. Wu and Y. Gu, “PV Isolated Three- Port Converter and Energy-Balancing Control Method for PV-Battery Power Supply Applications,” IEEE Transactions on Industrial Electronics, vol. 62, no. 6, pp. 3595-3606, June 2015.

M. Das and V. Agarwal, “Novel High-Performance Stand Alone Solar PV System with High-Gain High-Efficiency DC–DC Converter Power Stages,” IEEE Transactions on Industry Applications, vol. 51, no. 6, pp. 4718-4728, Nov.- Dec. 2015.

A. B. Ataji, Y. Miura, T. Isa and H. Tanaka, “Direct Voltage Control with Slip Angle Estimation to Extend the Range of Supported Asymmetric Loads for Stand-Alone DFIG,” IEEE Transactions on Power Electronics, vol. 31, no. 2, pp. 1015-1025, Feb. 2016.

N.A. Orlando, M. Liserre, R.A. Mastromauro and A. Dell ’Aquila, “A survey of control issues in PMSG-based small wind turbine system,” IEEE Trans. Industrial Informatics, vol.9, no.3, pp 1211-1221, July 2013.

T. Hirose and H. Matsuo, “Standalone Hybrid Wind-Solar Power Generation System Applying Dump Power Control Without Dump Load,” IEEE Trans. Industrial Electronics, vol. 59, no. 2, pp. 988-997, Feb. 2012.

Z. Qi, “Coordinated Control for Independent Wind-Solar Hybrid Power System,” 2012 Asia-Pacific Power and Energy Engineering Conference, Shanghai, 2012, pp. 1-4.

M. Rezkallah, S. Sharma, A. Chandra and B. Singh, “Implementation and control of small- scale hybrid standalone power generation system employing wind and solar energy,” 2016 IEEE Industry Applications Society Annual Meeting, Portland, OR, 2016, pp. 1-7.

A. Hamadi, S. Rahmani, K. Addoweesh and K. Al-Haddad, “A modeling and control of DFIG wind and PV solar energy source generation feeding four wire isolated load,” IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society, Vienna, 2013, pp. 7778-

S. K. Tiwari, B. Singh and P. K. Goel, "Design and control of autonomous wind-solar energy system with DFIG feeding 3-phase 4-wire network," 2015 Annual IEEE India Conference (INDICON), New Delhi, 2015, pp. 1-6.

S. K. Tiwari, B. Singh and P. K. Goel, “Design and control of micro-grid fed by renewable energy generating sources,” 2016 IEEE 6th Inter. Conference on Power Systems (ICPS), New Delhi, 2016, pp. 1-6.

H. Polinder, F. F. A. van der Pijl, G. J. de Vilder and P. Tavner, “Comparison of direct- drive and geared generator concepts for wind turbines,” IEEE International Conference on Electric Machines and Drives, 2005., San Antonio, TX, 2005, pp. 543-550.

Emmanouil A. Bakirtzis and Charis Demoulias “Control of a micro-grid supplied by renewable energy sources and storage batteries,” XXth Inter. Conf. on Electrical Machines (ICEM), pp. 2053-2059, 2-5 Sept. 2012.

S. Heier, Grid Integration of Wind Energy Conversion Systems. Hoboken,NJ: Wiley, 1998.

Z.M. Salameh, M.A. Casacca and W.A. Lynch, “A mathematical model for lead-acid batteries,” IEEE Trans. Energy Convers., vol. 7, no. 1, pp. 93-97, Mar.1992.

A B. Rey-Boué, R García-Valverde, F de A. Ruz-Vila and José M. Torrelo-Ponce, “An integrative approach to the design methodology for 3-phase power conditioners in Photovoltaic Grid-Connected systems,” Energy Conversion and Management, vol. 56, pp. 80–95, Dec 2011.

Z Xuesong,Song Daichun,Ma Youjie and Cheng Deshu, “The simulation and design for MPPT of PV system based on incremental conductance method,” 2010 WASE Inter. Conf. on Information Engineering, Aug, 2010, pp.314 – 317.

Shailendra. Kr. Tiwari, B. Singh and P. K. Goel, "Design and Control of Autonomous Wind-Solar Hybrid System with DFIG Feeding a 3-Phase 4-Wire System," in IEEE Transactions on Industry Applications, vol. PP, no. 99, pp. 1-1.

S. Kumar Tiwari, B. Singh and P. K. Goel, "Design and Control of Microgrid Fed by Renewable Energy Generating Sources," in IEEE Transactions on Industry Applications, vol. 54, no. 3, pp. 2041-2050, May-June 2018, doi: 10.1109/TIA.2018.2793213.

[19] S. Kumar Tiwari, B. Singh and P. K. Goel, "Design and Control of Microgrid Fed by Renewable Energy Generating Sources," in IEEE Transactions on Industry Applications, vol. 54, no. 3, pp. 2041-2050, May

June 2018, doi: 10.1109/TIA.2018.2793213.

Rezkallah, M. & Singh, Sanjeev & Chandra, Ambrish & Singh, Bhim & Tremblay, Marco & Saad, M. & Geng, Hua. (2019). Comprehensive Controller Implementation for Wind-PV-Diesel Based Standalone Microgrid. IEEE Transactions on Industry Applications. PP. 1-1. 10.1109/TIA.2019.2928254.

file:///C:/Users/PACE%20-

%20EEE/Downloads/43663.pdf

https://nehu.ac.in/public/uploads/Annual_Report_2019.pd f

Hanna Mäkinen, Janne Kaseva, Perttu Virkajärvi, Helena Kahiluoto, shifts in soil–climate combination deserve attention, Agricultural and Forest Meteorology, Volumes 234–235, 2017, Pages 236-246, ISSN 0168-1923,

Downloads

Published

2022-04-30

Issue

Vol. 9 No. 2 (2022): International Journal of Innovative Research in Engineering & Management (April )2022

Section

Articles

How to Cite

Integration of Renewable Energy Generating Sources with Micro-Grid . (2022). International Journal of Innovative Research in Engineering & Management, 9(2), 667–676. Retrieved from https://acspublisher.com/journals/index.php/ijirem/article/view/11212