A Literature Study of Hybrid Fibre Reinforced Concrete
DOI:
https://doi.org/10.55524/ijirem.2023.10.1.2Keywords:
Polypropylene Fibre, Crack Bridging, Hybrid Fibre Reinforced ConcreteAbstract
The drawbacks are that the concrete has been improved by using hybrid fibre in concrete. By hybridization benefits from two different fibres are utilized in a single concrete mixture. The hybrids fibres studied are basalt-polypropylene fibre, polypropylene-steel fibre, steel coconut fibre, polypropylene-e-waste fibre, polypropylene polyvinyl Alcohol and steel-glass- polypropylene fibre. The properties that are improved using hybrid fibres are compressive strength, tensile strength, flexural strength, limited crack propagation, and improved durability of the concrete structure. In maximum cases slump value decrease with an increase in fibre percentage.
Downloads
References
dynamic properties of hybrid fiber reinforced fly-ash concrete. Advances in Civil Engineering, 2021.
Pająk, M., 2016. Investigation on flexural properties of hybrid fibre reinforced self-compacting concrete. Procedia engineering, 161, pp.121-126.
Tawfik, M., El-said, A., Deifalla, A. and Awad, A., 2022. Mechanical Properties of Hybrid Steel-Polypropylene Fiber Reinforced High Strength Concrete Exposed to Various Temperatures. Fibers, 10(6), p.53.
Navilesh, Rahul B, Shankar, Shivakumar Patil, Vivekanand A Gutteder, “A Study on Hybrid Fiber Reinforced Concrete”, International Research Journal of Engineering and Technology (IRJET), 4(6), 2017.
Arooba Rafiq Bhat, and Ajay Vikram, 2022, “Experimental Investigation on the Effect Polypropylene Fibre and E-Waste Fibre Embedded in Concrete”, International Journal of Innovative Research in Engineering & Management (IJIREM), 9(6), pp. 89-93.
He, D., Wu, M. and Jie, P., 2017, December. Study on mechanical properties of hybrid fiber reinforced concrete. In IOP Conference Series: Earth and Environmental Science (Vol. 100, No. 1, p. 012111). IOP Publishing.
Kannan.S, “Study on strength properties of hybrid fibre reinforced concrete”, international journal of scientific & engineering research, Volume 7, Issue 4, 2016.
Rajalekshmi J. R., Raji R., 2015, “Study on flexural and shear behaviour of hybrid fibre reinforced self-compacting concrete
using recycled aggregates as replacement material”, International Journal of engineering research & technology (IJERT).
I. Markovic, High-Performance Hybrid-Fibre Concrete, 2006, DUP Science DUP, Delft.
Bautech Bautech, Industrial. Systems & Products. Hardened Concrete Floors. Reinforcing Fibres. Baucon, (2020). http://www.bautech.eu/en/ products/concrete floor/baucon.html.
MP, R., Patagundi, D.B. and Prakash, D.K., 2020. An Investigation on the Shrinkage Characteristics of Hybrid Fiber Reinforced Concrete Produced by Using Fibers of Different Aspect Ratio. International Journal of Advanced Research in Engineering and Technology (IJARET), 11(3), pp.19-28.
Abdulhameed, A.A., Al-Zuhairi, A.H., Al Zaidee, S.R., Hanoon, A.N., Al Zand, A.W., Hason, M.M. and Abdulhameed, H.A., 2022. The Behavior of Hybrid Fiber Reinforced Concrete Elements: A New Stress-Strain Model Using an Evolutionary Approach. Applied Sciences, 12(4), p.2245.
Eswari, S., Raghunath, P.N. and Suguna, K., 2008. Ductility performance of hybrid fibre reinforced concrete. American Journal of Applied Sciences, 5(9), pp.1257-1262.
Downloads
Published
Issue
Section
How to Cite
