An Overview of RFID in Libraries
Keywords:
Antenna, Libraries, RFID, Radio Frequency Identification, ReadersAbstract
In a library, circulation and shelving of reading materials is a time-consuming task that consumes the majority of the library staff's time. Because RFID minimises the time it takes to undertake circulation tasks, it is a viable solution to this problem. The benefits and limitations of RFID usage in libraries are discussed in this article, as well as the components and technological aspects of a modern RFID library system. It also looks at the existing level of RFID deployment in Indian libraries and makes some suggestions. Applications that use radio frequency identification (RFID) to provide massive access, huge data storage, as well as reprogramming. RFID technology may improve operational efficiency and accuracy. One of the most important variables determining whether RFID will be adopted in libraries is the cost. Despite the fact that RFID has increased library efficiency, the core of the library service has not altered.
Downloads
References
K. Kashyap, T. K. Sharma, and J. Rajpurohit, “Logistic map and wavelet transform based differential evolution,” Int. J. Syst. Assur. Eng. Manag., 2020, doi: 10.1007/s13198-019-00920-8.
M. K. Goyal et al., “Dosimetric evaluation of tandem based cervical high-dose-rate brachytherapy treatment planning using American Brachytherapy Society 2011 recommendations,” J. Radiother. Pract., 2016, doi: 10.1017/S1460396916000133.
K. L. Chopra, D. V. Rai, A. Sethi, J. S. Avadhani, and T. S. Kehwar, “Impact of dose calculation algorithms on the dosimetric and radiobiological indices for lung stereotactic body radiotherapy (SBRT) plans calculated using LQ-L model,” J. Radiother. Pract., 2018, doi: 10.1017/S1460396917000735.
K. Sharma, and N. Pachauri, “Prediction and optimization of abrasive wear loss of ultrahigh strength martensitic steel using response surface methodology, Harris Hawk and artificial neural network,” Int. J. Syst. Assur. Eng. Manag., 2021, doi: 10.1007/s13198-021-01160-5.
Y. Álvarez López, J. Franssen, G. Álvarez Narciandi, J. Pagnozzi, I. González-Pinto Arrillaga, and F. Las Heras Andrés, “RFID technology for management and tracking: E-health applications,” Sensors (Switzerland), 2018, doi: 10.3390/s18082663.
Y. Duroc and S. Tedjini, “RFID: A key technology for Humanity,” Comptes Rendus Physique. 2018, doi: 10.1016/j.crhy.2018.01.003.
H. D. Rjeib, N. S. Ali, A. Al Farawn, B. Al-Sadawi, and H. Alsharqi, “Attendance and information system using RFID and web-based application for academic sector,” Int. J. Adv. Comput. Sci. Appl., 2018, doi: 10.14569/IJACSA.2018.090137.
P. Oghazi, F. Fakhrai Rad, S. Karlsson, and D. Haftor, “RFID and ERP systems in supply chain management,” European Journal of Management and Business Economics. 2018, doi: 10.1108/EJMBE-02- 2018-0031.
R. Srivastava, P. K. Sharma, K. J. M. Das, and J. Manjhi, “A hybrid approach for head and neck cancer using online image guidance and offline adaptive radiotherapy planning,” J. Radiother. Pract., 2019, doi: 10.1017/S146039691800078X.
E. Valero, A. Adán, and C. Cerrada, “Evolution of RFID applications in construction: A literature review,” Sensors (Switzerland), 2015, doi: 10.3390/s150715988.
F. Bibi, C. Guillaume, N. Gontard, and B. Sorli, “A review: RFID technology having sensing aptitudes for food industry and their contribution to tracking and monitoring of food products,” Trends in Food Science and Technology. 2017, doi: 10.1016/j.tifs.2017.01.013.
A. Alwadi, A. Gawanmeh, S. Parvin, and J. N. Al Karaki, “Smart solutions for RFID based inventory
management systems: A survey,” Scalable Comput., 2017, doi: 10.12694/scpe.v18i4.1333.
C. Costa, F. Antonucci, F. Pallottino, J. Aguzzi, D. Sarriá, and P. Menesatti, “A Review on Agri-food Supply Chain Traceability by Means of RFID Technology,” Food and Bioprocess Technology. 2013, doi: 10.1007/s11947-012-0958-7.
S. Parlak, A. Sarcevic, I. Marsic, and R. S. Burd, “Introducing RFID technology in dynamic and time critical medical settings: Requirements and challenges,” J. Biomed. Inform., 2012, doi: 10.1016/j.jbi.2012.04.003.
J. C. Chen, C. H. Cheng, and P. B. Huang, “Supply chain management with lean production and RFID application: A case study,” Expert Syst. Appl., 2013, doi: 10.1016/j.eswa.2012.12.047.
A. Y. L. Chong and F. T. S. Chan, “Structural equation modeling for multi-stage analysis on Radio Frequency Identification (RFID) diffusion in the health care industry,” Expert Syst. Appl., 2012, doi: 10.1016/j.eswa.2012.01.201.
V. Sharda and R. P. Agarwal, “Analysis of Graphene Nanoribbon (GNR) interconnects with multi-gate device technology for VLSI applications,” 2016, doi: 10.1109/UPCON.2015.7456742.
D. J. Bhaskar, D. S. Aruna, G. Rajesh, M. Suganna, and M. Suvarna, “Emotional intelligence of Pedodontics and Preventive Dentistry postgraduate students in India,” Eur. J. Dent. Educ., 2013, doi: 10.1111/j.1600-0579.2012.00750.x.
S. Sharma, V. Vijayaraghavan, P. Tandon, D. R. V. Kumar, H. Sharma, and Y. Rao, “Dental education: Current scenario and future trends,” J. Contemp. Dent. Pract., 2012, doi: 10.5005/jp-journals-10024-1103.
J. Rai, R. C. Tripathi, and N. Gulati, “A comparative study of implementing innovation in education sector due to COVID-19,” 2020, doi: 10.1109/SMART50582.2020.9337148.
R. Singh and N. Singhal, “An enhanced vehicle parking management using artificial intelligence,” 2018, doi: 10.1109/SYSMART.2018.8746986.
S. Shukla, A. Lakhmani, and A. K. Agarwal, “A review on integrating ICT based education system in rural areas in India,” 2017, doi: 10.1109/SYSMART.2016.7894531.
M. M. Gupta, S. Jankie, S. S. Pancholi, D. Talukdar, P. K. Sahu, and B. Sa, “Asynchronous environment assessment: A pertinent option for medical and allied health profession education during the covid-19 pandemic,” Education Sciences. 2020, doi: 10.3390/educsci10120352.
D. Gupta et al., “Musculoskeletal pain management among dentists: An alternative approach,” Holist. Nurs. Pract., 2015, doi: 10.1097/HNP.0000000000000074.
R. K. Mittal, N. Garg, and S. K. Yadav, “Quality assessment framework for educational institutions in technical education: a literature survey,” On the Horizon. 2018, doi: 10.1108/OTH-08-2017-0066.
