Pyrolysis of Municipal Solid Waste (MSW) For Biofuel Production: An Analysis of the Impacts of MSW Components and Catalysts

Authors

  • Kumud Kant Awasthi Associate Professor, Department of Life Sciences, Vivekananda Global University, Jaipur, India Author

Keywords:

Fuel, MSW, Municipal Solid Waste, Pyrolysis, Pyrolysis Products

Abstract

With the awareness of the depletion of  fossil fuels, research into alternative energy sources has  begun. Biomass is a sustainable energy source that may  be used to make biofuels. These biofuels are then utilized  to generate electricity. Municipal-solid-waste (MSW) is a  kind of bio-mass that has been extensively utilized in  biofuel invention. According to the review, a ratio of  study would do in identifying the best methods for  generating biofuel from MSW since the 1900s. These type of processes is called pyrolysis. This procedure  eliminates a number of flaws that may be seen in other  procedures. It generates high-quality pyrolysis fuel while  lowering manufacturing costs. These examination paper  efforts on the pyrolysis of MSW utilizing its constituents  as feedstock of materials variable composition. The  consequences of interactions between various MSW  components and their heating levels have been  investigated. The reheating standards are then compared  to those of conventional fuels to show how important  MSW pyrolysis products are. The instance of catalytic  pyrolysis has been examined, and the associated warming ethics have been compared in order to produce high quality fuel. Furthermore, pyrolysis has been compared to  other processes to demonstrate how efficient it is. 

Downloads

Download data is not yet available.

References

N. Jain and Y. Awasthi, “WSN-AI based Cloud computing architectures for energy efficient climate smart agriculture with big data analysis,” Int. J. Adv. Trends Comput. Sci. Eng., 2019.

M. Iyer et al., “Environmental survival of SARS CoV-2 – A solid waste perspective,” Environ. Res., 2021.

S. Sarkar, U. Ray, D. Roy, D. Banerjee, and K. Kumar Chattopadhyay, “Synthesis of silicon nanowire and crystalline carbon quantum dots heterostructure and study of photo response and photoluminescence property,” Mater. Lett., 2021.

S. Stojkovikj, S. Oklevski, O. P. Jasuja, and M. Najdoski, “Visualization of latent fingermarks on thermal paper: A new method based on nitrogen dioxide treatment,” Forensic Chem., 2020.

L. Matsakas, Q. Gao, S. Jansson, U. Rova, and P. Christakopoulos, “Green conversion of municipal solid wastes into fuels and chemicals,” Electronic Journal of Biotechnology. 2017.

J. L. Easterly and M. Burnham, “Overview of biomass and waste fuel resources for power production,” Biomass and Bioenergy, 1996.

S. Parashar and V. K. Chawla, “A systematic review on sustainable green fibre reinforced composite and their analytical models,” in Materials Today: Proceedings, 2020.

M. D. M. Samsudin and M. M. Don, “Municipal solid waste management in Malaysia: Current practices, challenges and prospect,” J. Teknol. (Sciences Eng., 2013.

A. Rihan, Quaisarperween, K. Gaurav, Jayanand, and V. R. Durg, “Effect of butylated hydroxyanisole on hydrogen peroxide induced oxidative stress on cerebral glioma cell line,” Asian J. Pharm. Clin. Res., 2014.

Jayanand, M. Gupta, A. Sinha, I. Insa, and D. V. Rai, “Antibacterial potential of Cymbopogon flexuosus oil against Enterobacter aerogenes and Klebsiella pneumoniae,” Biomed., 2014.

J. Jamradloedluk and C. Lertsatitthanakorn, “Characterization and utilization of char derived from fast pyrolysis of plastic wastes,” in Procedia Engineering, 2014.

D. Singh, M. Gupta, R. C. Singh, S. P. Pandey, R. K. Karn, and P. K. Singh, “Polyvinylpyrrolidone (PVP) with Ammonium Iodide (NH4I) and 1-Hexyl-3- Methylimidazolium Iodide Ionic Liquid Doped Solid Polymer Electrolyte for Efficient Supercapacitors,” Macromol. Symp., 2019.

M. I. Tabash, M. A. Albugami, M. Salim, and A. Akhtar, “Service quality dimensions of E-retailing of Islamic banks and its impact on customer satisfaction: An empirical investigation of Kingdom of Saudi Arabia,” J. Asian Financ. Econ. Bus., 2019.

S. H. Cha, J. H. Son, Y. Jamal, M. Zafar, and H. S. Park, “Characterization of polyhydroxyalkanoates extracted from wastewater sludge under different environmental conditions,” Biochem. Eng. J., 2016.

M. Olazar, G. Lopez, M. Amutio, G. Elordi, R. Aguado, and J. Bilbao, “Influence of FCC catalyst steaming on HDPE pyrolysis product distribution,” J. Anal. Appl. Pyrolysis, 2009.

L. Dai et al., “Production of bio-oil and biochar from soapstock via microwave-assisted co-catalytic fast pyrolysis,” Bioresour. Technol., 2017.

G. Liu, Y. Liao, S. Guo, X. Ma, C. Zeng, and J. Wu, “Thermal behavior and kinetics of municipal solid waste during pyrolysis and combustion process,” Appl. Therm. Eng., 2016.

M. He et al., “Syngas production from pyrolysis of municipal solid waste (MSW) with dolomite as downstream catalysts,” J. Anal. Appl. Pyrolysis, 2010.

M. Rehan et al., “Effect of zeolite catalysts on pyrolysis liquid oil,” Int. Biodeterior. Biodegrad., 2017.

T. Namioka et al., “Hydrogen-rich gas production from waste plastics by pyrolysis and low-temperature steam reforming over a ruthenium catalyst,” Appl. Energy, 2011.

Downloads

Published

2021-05-30

Issue

Vol. 9 No. 3 (2021): International Journal of Innovative Research in Computer Science and Technology (May) 2021

Section

Articles

How to Cite

Pyrolysis of Municipal Solid Waste (MSW) For Biofuel Production: An Analysis of the Impacts of MSW Components and Catalysts . (2021). International Journal of Innovative Research in Computer Science & Technology, 9(3), 130–133. Retrieved from https://acspublisher.com/journals/index.php/ijircst/article/view/11498