A Contingent Study of DC-to-DC Converters for Sustainable Energy System
DOI:
https://doi.org/10.55524/Keywords:
DC, MATLAB, Renewable Energy, SimulinkAbstract
There had been significant growth in the area of renewable energy over the past recent years. Though there has been great development in sustainable energy, there is still a long way to go.There are certain inherent limits to this renewable electricity. Solar and wind electricity, for example, have an intermittent character. In comparison to the electric load, the electro-chemical reaction dynamics in the fuel cell are rather sluggish. This is incompatible with current electric applications, which demand continuous voltage and frequency. This research suggested and tested a novel power circuit to address the problem of renewable energy's intermittent nature and poor reaction. The proposed circuit combines a variety of renewable energy sources with energy storage. The influence of intermittent nature can be considerably decreased by combining biofuels have a probabilistic proclivity towards compensating for one another. The above integration will improve the entire system's dependability and efficiency. It may either deliver more energy to the load or absorb surplus energy from the energy sources, considerably enhancing the overall system dynamics. We provide electricity for the load using fuel cells, while solar and wind energy are employed to maintain power. We're employing buck boost choppers and boost choppers to adjust the power to the right level. For AC loads, an inverter converts DC to AC. We use renewable energy in our project to ensure steady electricity during load. In MATLAB / Simulink, a software simulation model is created.
Downloads
References
Iwakura C, Tanaka M, Nakamatsu S, Inoue H, Matsuoka M and Furukawa N, “Electrochemical properties of Ni/(Ni + RuO2) active cathodes for hydrogen evolution in chlor-alkali electrolysis”, Electrochimica Acta 40(8),1995,pp 977-982.
Kreuter W, and Hofmann H, “Electrolysis is the important energy transformer in a world of sustainable energy”, Int. J. Hydrogen Energy 23(8), 1998, pp 661-666.
Neagu C, Jansen H, Gardeniers H, and Elwenspoek M, “The electrolysis of
water: An actuation principle for RES” , Mechatronics, 2000,pp 571-581.
Agbossou K, Chahine R, Hamelin J, Laurencelle F, Anouar A, St-Arnaud J-M, Bose TK, “Renewable energy systems based on hydrogen for remote applications”, Journal of Power Sources 96, 2001, pp168-172.
Menzl F., Wenske M., Lehmann J, “Windmill-electrolyser system for a hydrogen based energy supply”, in Nummer 2: Regenerative Energien, 2001.
Lehmann J., Luschtinetz T., Menzl F., “The wind-hydrogen fuel cell chain”, in 14 th World Hydrogen Energy Conference, Montreal, Canada, June 9-13, 2002.
Kolhe M, Agbossou K, Kelouwani S, Anouar A, Fournier M, Hamelin J, and Bose TK, “Long-term performance of stand alone renewable energy system for hydrogen production”, WHEC 2002, 14 The World Hydrogen Energy Conference, Montreal, 9-13 June 2002.
C. Elam, B. Kroposki, G. Bianchi, and K. Harrison, “Renewable electrolysis integrated system development and testing,” DOE Hydrogen Program, Progress Report FY2004, 2004.
S. Kelouwani, K. Agbossou, , R. Chahine, “Model for energy conversion in renewable energy system with hydrogen storage”, Journal of PowerSources 140, 2005,pp 392–399.
J. I. Levene, M. K. Mann, R. Margolis, and A. Milbrant, “Analysis of Hydrogen Production from Renewable Electricity Sources,” NREL
Downloads
Published
Issue
Section
How to Cite
