3D Modeling and Static Analysis of Telescopic Shock Absorber Unit
DOI:
https://doi.org/10.55524/Keywords:
Telescopic Shock Absorber, 3D Modeling, Belleville disc, Cylinder, Flange, Eye ball, FEA, RailwayAbstract
In this paper, we present the 3D modelling and structural analysis of a telescopic shock absorber unit that have been considered. A telescopic shock absorber unit from railway wheels was used in this study. The 3D model of a telescopic shock absorber unit consists of a cylinder, Belleville disc, eye ball, flange models that were created with the help of CATIA V5 software, and Finite Element Analysis (FEA) is also carried out to find the Equivalent Von-Misses stresses and deformations to reduce the bouncing, stability, and improve the performance of a shock absorber unit.
Downloads
References
Duym S.W, Steins R, Baron G.V., Reybrouck K.G. Physical Modeling of the Hysteretic Behaviour of Automotive Shock Absorbers, SAE Technical Paper Series 970101, 1997.
S.Martande, Y.N.Jangale, N. S.Motagi, Design and Analysis of Shock Absorber, International Journal of Application or Innovation in Engineering and Management (IJAIEM), 2013, Vol 2, Issue 3, pp. 197-199.
Patel, A Review Study- Design and Analysis of Suspension System, International Journal for Scientific Research & Development (IJSRD) 2014, Vol. 2, Issue 03. pp. 187-192.
R.A. Tekade, C.V. Patil. Structural and Modal Analysis Of ShockAbsorber Of Vehicle - A Review, International Journal for Research in Applied Science and Engineering Technology (IJRASET), 2014. Vol. 2 Issue III, 2321-9653.
M. Sreenivasan et al., Finite element analysis of coil spring of a motorcycle suspension system using different fiber materials, Mater. Today Proc., 2020, Vol. 33, no. 40, pp. 275– 279. DOI: 10.1016/j.matpr.2020.04.051.
D.R.Dolas, K.K Jagtap, and J.Aurangabad, Analysis of Coil Spring Used in Shock Absorber using CAE, Int. J. Eng. Res., 2016, Vol. 52, pp. 123–126.
A. P. N, A. Gunaki, C. Acharya, S. Gilbert, and R. Bodake, Design, analysis, and simulation of the double-wishbone suspension system, Int. J. Mech. Eng, 2014, Vol. 2, no. 6, pp. 1–7.
Arvind Katyayn and C. R. Tripathy, Design and Analysis of Helical Coil Spring to Improve Its Strength Through Geometrical Modification, Int. J. Tech. Res. Sci. 2020, Vol. 05, no. 05, pp. 20–25. DOI: 10.30780/ijtrs.v05.i05.003.
T. M. Mulla, S. J. Kadam, and V. S. Kengar, Finite Element
Analysis of Helical Coil Compression Spring for Three Wheeler Automotive Front Suspension, Int. J. Mech. Ind. Eng. 2013, pp. 70–73, DOI: 10.47893/ijmie.2013.1130.
G. Vukelic and M. Brcic, Failure analysis of a motor vehicle coil spring, Procedia Struct. Integr. 2016, Vol. 2, pp. 2944– 2950. DOI: 10.1016/j.prostr.2016.06.368.
A. C M. Bhasha, N. V.R. Reddy, B.R.Naveen, Design and Analysis of Shock Absorber, International Research Journal of Engineering and Technology (IRJET), 2017,Vol.04 Issue: 01, e-ISSN: 2395 -0056.
P.P.Mohan, L. Kishore.T, Design and analysis of A Shock Absorber, IJRET: International Journal of Research in Engineering and Technology, Volume: 01 Issue: 04 | Dec 2012, ISSN: 2319-1163.
Johnson, D.Jose, A.Tony, Design And Analysis Of A Shock Absorber, International Journal of Scientific & Engineering Research, 2016,Vol. 7, Issue 3, ISSN 2229-551.
Downloads
Published
Issue
Section
How to Cite
