Solution of Beam Structure Analysis Using SAP2000

Samsul A Rahman Sidik Hasibuan; Annisa Adika Qolby

doi:10.55524/ijircst.2023.11.1.13

Authors

Samsul A Rahman Sidik Hasibuan Department of Civil Engineering, Medan Area University, Medan, Indonesia Author
Annisa Adika Qolby Department of Civil Engineering, Medan Area University, Medan, Indonesia Author

DOI:

https://doi.org/10.55524/ijircst.2023.11.1.13

Keywords:

beam structural, simple beam, SAP2000

Abstract

The beam structure is an essential structural element for construction professionals, and most engineers should be familiar with beams. The type of beam structure discussed in this paper is a simple beam structure. Calculating the forces and structural deformations numerically takes longer and require good accuracy. In this increasingly sophisticated era, various kinds of software are available, one of which is SAP2000, which can be used to obtain internal forces and structural deformations quickly and accurately. In this paper, a simple beam structure is modeled and analyzed using SAP2000 software. This paper aims to provide solutions for analyzing structures, especially simple beams. Manual calculations will also validate this paper according to the requirements of static balance. Furthermore, the analysis results using SAP2000 software and manual calculations have been obtained and validated. The analysis results showed that the values obtained did not significantly differ. So it can be concluded that structural analysis with SAP2000 software can be a fast and accurate solution.

Downloads

Download data is not yet available.

References

R. Afriani, Analisis Struktur Simple Beam Menggunakan Microsoft Visual Basic 6.0. Surakarta: Universitas Muhammadiyah Surakarta, 2014.

M. Szumigała, “Iterative Methods Of Beam-Structure Analysis,” In Modern Building Materials, Structures And Techniques, Mbmst 2016, 2017, Vol. 172, Pp. 1093–1101, Doi: 10.1016/J.Proeng.2017.02.169.

A. Sedayu, “Modelling In Simple Beam Structure With Sap 2000 And Autodesk Rsa Professional,” In Proceeding Of International Conference On Green Technology, 2017, Vol. 8, No. 1, Pp. 109–114.

S. P. Dalal, S. A. Vasanwala, And A. K. Desai, “Comparison Of Steel Moment Resisting Frame Designed By Elastic Design And Performance Based Plastic Design Method Based On The Inelastic Response Analysis,” Int. J. Civ. Struct. Eng., Vol. 45, No. 9, Pp. 1–13, 2012, Doi: 10.5120/6805-9144.

Tanjung, D., “Simulasi Analisa Struktur Sap2000 7.4 Versi Student Dengan Metode Elemen Hingga,” Al Ulum Seri Saintek, Vol. 1, No. 2, Pp. 222–237, 2013.

P. Kohnke, “Theory: Release 5.7. Ansys.” 2001. [7] Computer And Structures Inc, “Etabs.” Usa, Barkeley, California, 2003.

Bentley System Official Website, “Bentley System Inc.” 2014, [Online]. Available: Https://Www.Bentley.Com. [9] Computers & Structures Inc, “Sap 2000,” Sap 2000. Usa, Barkeley, California, 2019.

M. N. Sholeh, Analisa Struktur Sap2000 V22, No. February. 2021.

S. A. R. S. Hasibuan, D. Kurniati, And M. P. Sari, “Desain Dan Analisis Flat Slab Dengan Software Matlab,” Teknika, Vol. 16, No. 2, P. 88, 2021, Doi: 10.26623/Teknika.V16i2.2357.

S. Hasibuan, “Analisis Kinerja Seismik Rumah Pasangan Batu Bata,” In Snitt- Politeknik Negeri Balikpapan, 2020, Pp. 151–156.

Hasibuan, Samsul A Rahman Sidik., “Solusi Analisis Struktur Plane Truss Dengan Opensees,” In Prosiding Seminar Nasional Kahuripan I Tahun 2020, 2020, No. November, Pp. 290–293.

Y. W. Haryanto, Analisis & Perancangan Struktur Frame Menggunakan Sap 2000 Versi 7.42. Yogyakarta: Andi Yogyakarta, 2001.

S. P. Tampubolon And A. S. Mulyani, “Analysis And Calculation Of Wooden Framework Structure By Using Structural Analysis Program (Sap)-2000 And Method Of Joint,” In Iop Conference Series: Earth And Environmental Science, 2021, Vol. 878, No. 1, Doi: 10.1088/1755- 1315/878/1/012042.