Experimental Investigation Mechanical Properties of Concrete  Mix with Chopped Jute Fiber and Fly Ash

Nadiya Majeed; Brahamjeet Singh

doi:10.55524/ijircst.2023.11.2.2

Authors

Nadiya Majeed M.Tech. Scholar, Department of Civil Engineering, RIMT University, Mandi Gobindgarh, Punjab, India Author
Brahamjeet Singh Assistant Professor, Department of Civil Engineering, RIMT University, Mandi Gobindgarh, Punjab, India Author

DOI:

https://doi.org/10.55524/ijircst.2023.11.2.2

Keywords:

Concrete, M25, Fly Ash, Coarse Aggregate

Abstract

The quest for substitutes for some concrete elements is ongoing with the goal of reducing the environmental impact of concrete production and improving the final concrete's strength. The management of demolishing waste poses a serious problem, and this is a reason why it has been tried as coarse aggregates in new concrete. However, the properties of aggregate and produced green concrete (concrete made with recycled aggregates from demolishing waste), particularly strength, are condensed and ways of justifying this problem create a dynamic investigation. This is due to the age of the concrete and old mortar adhered effects. Current advancements in waste utilization, waste processing to create coarse aggregates of the desired size, etc., have been presented in. Environmental effects of green concrete and green concrete towards sustainable environment have also been studied. The variation in waste-related published results demonstrates the need for more research in the field to increase trust in its operational application.

Downloads

Download data is not yet available.

References

Indian Standard 10262: 2009, Concrete Mix Proportioning: Guidelines.

Indian Standard 1199: 1959, Methods of Sampling and Analysis of Concrete.

Indian Standard 516: 1959, Methods of tests for Strength of Concrete.

IS: 10262-1982, Recommended Guidelines for Concrete Mix Design, Bureau of Indian

IS: 383-1970, Specification of Coarse and Fine Aggregate from Natural Sources for

IS: 456-2000, Code of practice for plain and reinforced cement concrete, Bureau of Indian Standards, New Delhi, India.

Fonseca, R. P., Rocha, J. C., Cheriaf, M. (2021). Mechanical properties of mortars reinforced with Amazon rainforest natural fibers. Materials, 14(1), 155. DOI 10.3390/ma14010155. Figure 10: Examples of HFRC, CFRC, SFRC, and PC fiber reinforced concrete specimens after splitting test at the age of 28 days 1316 JRM, 2022, vol.10, no.5.

Juarez, C., Duran, A., Valdez, P., Fajardo, G. (2007). Performance of “Agave lecheguilla” natural fiber in Portland cement composites exposed to severe environment

conditions. Building and Environment, 42(3), 1151–1157. DOI 10.1016/j.buildenv.2005.12.005.

Mahmud, S., Hasan, K. F., Jahid, M. A., Mohiuddin, K., Zhang, R. et al. (2021). Comprehensive review on plant fiber-reinforced polymeric biocomposites. Journal of Materials Science, 2021, 1–34. DOI 10.1007/ s10853-021- 05774-9.

Memon, M. J., Jhatial, A. A., Murtaza, A., Raza, M. S., Phulpoto, K. B. et al. (2021). Production of eco-friendly concrete incorporating rice husk ash and polypropylene fibres. Environmental Science and Pollution Research, 2021, 1–17. DOI 10.1007/s11356-021-13418-3.

Olivito, R. S., Cevallos, O. A., Carrozzini, A. (2014). Development of durable cementitious composites using sisal and flax fabrics for reinforcement of masonry structures. Materials & Design, 57, 258–268. DOI 10.1016/j. matdes.2013.11.023.

Poorsaheli, H. B., Behravan, A., Aghda, S. T. T. (2021). Durability performance of hybrid reinforced concretes (steel fiber + polyolefin fiber) in a harsh marine tidal zone of Persian Gulf. Construction and Building Materials, 266, 121176. DOI 10.1016/j.conbuildmat.2020.121176.

Qiao, X., Ni, S., Lu, H., Wang, X., Zhou, X. (2021). A novel method to prepare chemical fibers by plasticizing cotton with 1-allyl-3-methylimidazolium chloride. International Journal of Biological Macromolecules, 166,1508–1512. DOI 10.1016/j.ijbiomac.2020.11.03.

Rostami, R., Zarrebini, M., Mandegari, M., Sanginabadi, K., Mostofinejad, D. et al. (2019). The effect of concrete alkalinity on behavior of reinforcing polyester and polypropylene fibers with similar properties. Cement and Concrete Composites, 97, 118–124. DOI 10.1016/j.cemconcomp.2018.12.012.

K. Uma Shankar and K. Suganya “ durability study of structural elements using fly ash aggregates”, International Journal of Management, Information Technology and Engineering Vol. 2, Issue 1, Jan 2014, 1-6.

“Strength and Durability studies on Fly Ash based Geopolymer Bricks” by C. Antony Jayaseh Kumar1, G. Saravanan, A.K. Ramakrishnan and S. Kandasamy, Asian journal of civil engineering VOL. 14, NO. 6 (2013).

Nimitha, Vijayaraghavan, Dr. A.S. Wayal “Effect of Manufactured Sand on Durability Properties of Concrete”, American Journal of Engineering Research (AJER) e-ISSN: 2320-0847 p-ISSN: 2320- 0936 Volume-02, Issue-12, pp

-440.

Alvin Harison, Vikas Srivastava and Arpan Herbent (2014) - “Effect of Fly-ash on Compressive Strength of Portland Pozzolona Cement Concrete” Journal of Academia and Industrial Research, Vol. 2, ISSN:2278-5213.

Prof R. S. Deotale, Harshavardhan L. Rangari, Prof Swapnil P. Wanjari “To Study of Concrete Mix with Partial Replacement of Cement by suitable Pozzolonic Cementitious Material and Sand by Manufactured Quarry Sand”, International Journal of Emerging Technology and Advanced Engineering.

da Fonseca, R. P., Rocha, J. C., Cheriaf, M. (2021). Mechanical properties of mortars reinforced with Amazon rainforest natural fibers. Materials, 14(1), 155. DOI 10.3390/ma14010155.

Juarez, C., Duran, A., Valdez, P., Fajardo, G. (2007). Performance of “Agave lecheguilla” natural fiber in Portland cement composites exposed to severe environment conditions. Building and Environment, 42(3), 1151–1157. DOI 10.1016/j.buildenv.2005.12.005.

Mahmud, S., Hasan, K. F., Jahid, M. A., Mohiuddin, K., Zhang, R. et al. (2021). Comprehensive review on plant fiber-reinforced polymeric biocomposites. Journal of Materials Science, 2021, 1–34. DOI 10.1007/ s10853-021- 05774-9.

Memon, M. J., Jhatial, A. A., Murtaza, A., Raza, M. S., Phulpoto, K. B. et al. (2021). Production of eco-friendly concrete incorporating rice husk ash and polypropylene fibres. Environmental Science and Pollution Research, 2021, 1–17. DOI 10.1007/s11356-021-13418-3.

Olivito, R. S., Cevallos, O. A., Carrozzini, A. (2014). Development of durable cementitious composites using sisal and flax fabrics for reinforcement of masonry structures. Materials & Design, 57, 258–268. DOI 10.1016/j. matdes.2013.11.023.

Poorsaheli, H. B., Behravan, A., Aghda, S. T. T. (2021). Durability performance of hybrid reinforced concretes (steel fiber + polyolefin fiber) in a harsh marine tidal zone of Persian Gulf. Construction and Building Materials, 266, 121176. DOI 10.1016/j.conbuildmat.2020.121176.

Qiao, X., Ni, S., Lu, H., Wang, X., Zhou, X. (2021). A novel method to prepare chemical fibers by plasticizing cotton with 1-allyl-3-methylimidazolium chloride. International Journal of Biological Macromolecules, 166, 1508–1512. DOI 10.1016/j.ijbiomac.2020.11.030.