Stress Corrosion Studies of AL 2014 Alloy Using Synthesized Pyrimidin Derivative Inhibitor in Different Concentration of HCl Solution

Authors

  • G Nataraja Department of Chemistry, Srinivas University, Mangaluru, Karnataka 575023, India
  • B M Praveen Department of Chemistry, Srinivas University, Mangaluru, Karnataka 575023, India
  • R D Pruthviraj Department of Chemistry, Rajarajeswari College of Engineering, Mysore Road, Bengaluru, Karnataka 560074, India
  • A Sudhakara Department of Chemistry, Rajarajeswari College of Engineering, Mysore Road, Bengaluru, Karnataka 560074, India

DOI:

https://doi.org/10.48165/

Keywords:

Vortex method, Stress corrosion, Autoclav, AL 2014 alloy, Synthesized inhibitor

Abstract

The stress corrosion resistance of AL 2014 in high  temperature acidic media using The inhibitors MPPA and AMPO has been evaluated using an  autoclave. The liquid melt metallurgy technique  using vortex method was used to fabricate AL  2014 alloy. Stress corrosion tests were conducted  using weight loss method for different exposure  time, normality and temperature of the acidic  medium. The corrosion rates of AL 2014 alloy was  lower to that of Concentration increases of the inhibitor. 

Downloads

Download data is not yet available.

References

Karaaslan A, Kaya I, Atapek H. (2017). Effect of aging temperature and of retrogression treatment time on the microstructure and mechanical properties of alloy AA 7075. Metal Sci Heat Treat, 49, 9-10.

Venugopal T, Srinivasa Rao K, Prasad Rao K. (2016). Studies on friction stir welded AA7075 aluminum alloy. Trans Indian Inst Metals, 57(6), 659-63.

Rao K Srinivasa, Rao K Prasad. (2015). Pitting corrosion of heat-treatable aluminium alloys and welds: a review. Trans Indian Inst Met, 57(6), 593-610.

Ranganatha R. (2017). Multi-stage heat treatment of aluminum alloy AA7049.Trans Nonferrous Met Soc China, 1570-5.

Su JQ. (2018). Microstructural investigation of friction stir welded 7050- T651aluminium. Acta Mater, 51, 713-29.

Hassan KhAA, Norma AF, Price DA, Prangnell PB. (2015). Stability of nuggetzone grain structures in high

strength Al- alloy friction stir welds during solution treatment. Acta Mater, 51(7), 1923e36.

Sullivan A, Robson JD. (2018). Microstructural properties of friction stir welded and post weld heated 7449 aluminum alloy thick plate. Mater Sci Eng, 478, 351e60.

Feng JC, Chen YC, Liu HJ. (2016). Effect of post weld heat treatment on microstructure and mechanical properties of friction stir welded joints of 2219-O aluminum alloy. Mater Sci Technol, 22(1), 86-90.

Cina B and Gan R. (2015). Reducing the susceptibility of alloys, particularly aluminum alloys, to stress corrosion cracking. United States Patent 3856584; 24.

Cina B, Zeidess F. (2016). Advances in the heat treatment of 7000 type aluminum alloys by retrogression and re-aging. Mater Sci Forum, 102-104.

Oliveira Jr AF, de Barros MC, Cardoso KR, Travessa DN. (2016). The effect of RRA on the strength and SCC resistance on AA7050 and AA7150aluminum alloys. Mater Sci Eng, 379A. 321-6.

Autar K. Kaw, (1997). Mechanics of Composite Materials, Vol. 1, CRC Press LLC, Florida, USA.

Ayman, M. Atta, Manar, E., Abdel-Raouf, Shimaa, M., Elsaeed, Abdel-Azim, A., Abdel-Azim, (2006). Compressive Properties and Curing Behaviour of Unsaturated Polyester Resins in the Presence of Vinyl Ester Resins Derived from Recycled Poly(ethylene terephthalate), Journal of Polymer Research, 12(5), 373-383.

Basara C, Yilmazer U, Bayram G., (2005).Mechanism of reinforcement in a nanoclay/polymer composite. Journal of Applied Polymer Science, 98, 1081- 1086.

Ben R Bogner, (2005). Composites for Chemical Resistance and Infrastructure Applications, Elsevier, pp30-35.

Beyer G, (2001). Nanocomposites - A new concept for flame retardant polymers, Polymer News, 26 (11), 370-378.

Beyer G, (2001).Nanocomposites II: A new flame protection system for polymers. International Polymer Science and Technology, 28 (10), 1-5.

Beyer G, (2004). Nanotechnology application for polymers - improved flame retardancy for polymers and cables by nano composites, Gummi Fasern

Kunststoffe, 57 (5), 309-314.

Beyer G, (2005). Nanocomposites as a new concept for flame retardancy of polymers, IRC 2005: Proceedings of the North European International Rubber conference, Maastricht, The Netherlands, London, IOM Communications, pp 327- 337.

Bhuvaneswary M.G. and Eby Thomas Thachil, (2008). Blends of natural rubber with unsaturated polyester resin, International Journal of Polymeric Materials, 57, 1-12.

Blumstein A, (1965). Polymerization of adsorbed monolayers–II, Thermal degradation of the inserted polymer. Journal of Polymer Science A, 3, pp 2665 – 2673.

Blumstein A., S. Vilasagar, S. Ponrathnam, S. B. Clough, R. B. Blumstein, G. Maret, (1982). nematic and cholesteric thermotropic polyesters with azoxybenzenemesogenic units and flexible spacers in the main chain, journal of polymer science: polymer physics edition, 20(5), 877–892.

Bourbigot, S., Devaux, E., Flambard, X., (2002). Flammability of polyamide- 6/clay hybrid nanocomposite textiles. Polymer Degradation and Stability, 75(2), pp 397-402.

Bryan Harris, (1999). Engineering Composite Materials, The Institute of Materials, London.

Downloads

Published

2021-07-12

Issue

Vol. 40 No. 1 (2021): Bulletin of Pure and Applied Sciences Chemistry (Jan-Jun) 2021

Section

Articles

How to Cite

Stress Corrosion Studies of AL 2014 Alloy Using Synthesized Pyrimidin Derivative Inhibitor in Different Concentration of HCl Solution . (2021). Bulletin of Pure and Applied Sciences-Chemistry , 40(1), 16–22. https://doi.org/10.48165/